HY2M

HY2M-MG W02

HY2M-MG W02 Box
Release 2002.10
Price ¥1,500
HY2M-MG W02 - Box side view (1/2) HY2M-MG W02 - Box side view (2/2)

Box side view

HY2M-MG W02 - Runners

Runners

HY2M-MG W02 - Parts diagram

Parts diagram

HY2M-MG W02 - Manual (1/4) HY2M-MG W02 - Manual (2/4) HY2M-MG W02 - Manual (3/4) HY2M-MG W02 - Manual (4/4)

Manual

HY2M-MG W02 - Straight build (1/2) HY2M-MG W02 - Straight build (2/2)

Straight build

HY2M-MG W02 - LED lit up

LED lit up

HY2M-MG W02 - To assemble, you'll need to trim the LED and Hall IC leads as shown.

To assemble, you'll need to trim the LED and Hall IC leads as shown.

HY2M-MG W02 - There's even a helper part included for bending the LED leads into the right position.

There's even a helper part included for bending the LED leads into the right position.

HY2M-MG W02 - The LED assembly configuration differs between the two arms.

The LED assembly configuration differs between the two arms.

HY2M-MG W02 - The Shining Gundam's arms also use a sliding forearm armor mechanism to activate the LEDs. (1/2) HY2M-MG W02 - The Shining Gundam's arms also use a sliding forearm armor mechanism to activate the LEDs. (2/2)

The Shining Gundam's arms also use a sliding forearm armor mechanism to activate the LEDs.

HY2M-MG W02 - LEDs lit up inside the wrist by sliding the forearm armor. (1/2) HY2M-MG W02 - LEDs lit up inside the wrist by sliding the forearm armor. (2/2)

LEDs lit up inside the wrist by sliding the forearm armor.

HY2M-MG W02 - Comparison with the original MG Shining Gundam arm (left)

Comparison with the original MG Shining Gundam arm (left)

HY2M-MG W02 - Fitted onto the MG Shining Gundam. (1/2) HY2M-MG W02 - Fitted onto the MG Shining Gundam. (2/2)

Fitted onto the MG Shining Gundam.

HY2M-MG W02 - Shining Finger action (1/4) HY2M-MG W02 - Shining Finger action (2/4) HY2M-MG W02 - Shining Finger action (3/4) HY2M-MG W02 - Shining Finger action (4/4)

Shining Finger action

HY2M-MG W02 - Sekiha Tenkyoken pose on the MG G Gundam (1/3) HY2M-MG W02 - Sekiha Tenkyoken pose on the MG G Gundam (2/3) HY2M-MG W02 - Sekiha Tenkyoken pose on the MG G Gundam (3/3)

Sekiha Tenkyoken pose on the MG G Gundam

HY2M-MG W02 - MG Shining & G Gundam combined shot

MG Shining & G Gundam combined shot

This kit is HY2M-MG W02, the glowing hand unit following the previous release. It includes two arm units — the Sekiha Tenkyoken arm unit for the MG G Gundam, and the Shining Finger arm unit for the MG Shining Gundam. The Sekiha Tenkyoken unit shares the same structure as the previous kit, but the Shining Finger arm unit comes with a whole new design.

Assembling the Shining Finger arm unit is a bit trickier than the God Finger, so you'll really want to read through the manual carefully before diving in. There's even a helper part just for bending the LED lead unit into shape — I ended up taking it apart and reassembling it two or three times before I finally got the LEDs to light up properly.

Both the Shining Finger and Sekiha Tenkyoken hands put on an impressive light-up display, and with the lights dimmed a little, you can get some really striking poses. That said, if you want to properly pull off the Sekiha Tenkyoken on the MG G Gundam, you'll need both hands, so you'll want to build the previous kit alongside this one. Either way, this is easily one of the best value-for-money kits in the HY2M-MG lineup — if you're a G Gundam fan, it's well worth picking up together with that set. :-)

AIThis page was translated by Claude Sonnet.