Kit Review

Straight build + stickers/wet decals

Size comparison with a cigarette pack.
It's MG, so it's nice and big~

MG G Parts [Hrududu] - Various angles (1/6)

MG G Parts [Hrududu] - Various angles (2/6)

MG G Parts [Hrududu] - Various angles (3/6)

MG G Parts [Hrududu] - Various angles (4/6)

Various angles

Underside

MG G Parts [Hrududu] - The angle of the shield-mounting gimmick on the upper nose sensor unit is a bit ambiguous... Even

The angle of the shield-mounting gimmick on the upper nose sensor unit is a bit ambiguous...
Even looking at the manual, build examples, and various other reference shots, there's no consistent answer for exactly what angle it should be set at.
In some cases it's horizontal, in others it points downward, and some even have it pointing upward.
In the end, I just went with horizontal across the board, like the middle example, for my photos.

MG G Parts [Hrududu] - The claw wing unit can be expanded and deployed as shown above, and you can borrow beam saber part

The claw wing unit can be expanded and deployed as shown above,
and you can borrow beam saber parts from another MG kit to use with it.

A new-style black Action Base is included.

MG G Parts [Hrududu] - Includes various joint parts for combining two units and recreating Hazel Ra, plus a chest armor p

Includes various joint parts for combining two units and recreating Hazel Ra, plus a chest armor piece for the Hazel.

Leftover parts from the stand runners

MG G Parts [Hrududu] - The articulated joint gimmick on the rear of the Long Blade Rifle — properly implemented only in t

The articulated joint gimmick on the rear of the Long Blade Rifle — properly implemented only in the MG.
The front section is for Hazel Owsla, and the rear section is for the two-unit combination.

To combine two G Parts [Hrududu] units, you'll obviously(...) need two MG G Parts [Hrududu] kits.

First, disassemble each G Parts [Hrududu] by section as shown above,

then join the two cockpit blocks together using the separate joint parts.

Remove one of the lower covers from the cockpit block, then plug in two additional joint parts.

MG G Parts [Hrududu] - The pin that held the chest armor in place on the underside of the nose sensor unit gets folded an

The pin that held the chest armor in place on the underside of the nose sensor unit gets folded and tucked inside.
(Note: this gimmick is exclusive to the MG)

Position the two nose sensor units top and bottom, then attach the chest armor in the center.

Deploy the two claw wing units, move the auxiliary parts to the rear and attach them, then...

Arrange the four wing units as shown above and attach them to the main body.

MG G Parts [Hrududu] - Raise the peg on the rear of the Long Blade Rifle, then plug it into the back of the claw wing — t

Raise the peg on the rear of the Long Blade Rifle, then plug it into the back of the claw wing — transformation complete.

MG G Parts [Hrududu] - G Parts [Hrududu] two-unit combination from various angles (1/7)

MG G Parts [Hrududu] - G Parts [Hrududu] two-unit combination from various angles (2/7)

MG G Parts [Hrududu] - G Parts [Hrududu] two-unit combination from various angles (3/7)

MG G Parts [Hrududu] - G Parts [Hrududu] two-unit combination from various angles (4/7)

MG G Parts [Hrududu] - G Parts [Hrududu] two-unit combination from various angles (5/7)

G Parts [Hrududu] two-unit combination from various angles

Underside

In the end, everything combines together with just one chest armor piece left over.

A look at it with beam parts borrowed and applied

You can combine it with the MG Hazel Kai to create Hazel Ra.

Replace the MG Hazel's chest parts with the slotted chest parts included in this kit.

MG G Parts [Hrududu] - Attach the G Parts [Hrududu]'s chest armor unit to the chest, raise the backpack upward, then fold

Attach the G Parts [Hrududu]'s chest armor unit to the chest, raise the backpack upward,
then fold the auxiliary actuator units on top of the shoulders forward as shown above.

MG G Parts [Hrududu] - Move the nose sensor unit to the rear of the cockpit block, then plug in the joint parts needed to

Move the nose sensor unit to the rear of the cockpit block, then plug in the joint parts needed to connect it to the backpack.

MG G Parts [Hrududu] - Add the auxiliary parts to the chest armor unit, then mount the G Parts [Hrududu] main body onto t

Add the auxiliary parts to the chest armor unit, then mount the G Parts [Hrududu] main body onto the backpack.

Wing unit attachment complete

Separate the Long Blade Rifle as shown above.

Detach the blade, move it to the front position and plug it in,

then attach it to the front and rear of the Hazel Kai's beam rifle.

MG G Parts [Hrududu] - To support the main body, the manual guides you to reassemble the Action Base in the orientation s

To support the main body, the Action Base is reassembled in the orientation shown above,
and the manual guides you to plug it into the Booster section of the wings.

MG G Parts [Hrududu] - It can stand upright without a stand, but the G Parts [Hrududu] wings at the back may droop downwa

It can stand upright without a stand,
but the G Parts [Hrududu] wings at the back may droop downward, and the joint durability feels a bit iffy, so it doesn't look like it could hold up for long periods.

Completed Hazel Ra

MG G Parts [Hrududu] - MG Hazel Ra from various angles (1/7)

MG G Parts [Hrududu] - MG Hazel Ra from various angles (2/7)

MG G Parts [Hrududu] - MG Hazel Ra from various angles (3/7)

MG G Parts [Hrududu] - MG Hazel Ra from various angles (4/7)

MG G Parts [Hrududu] - MG Hazel Ra from various angles (5/7)

MG Hazel Ra from various angles

MG G Parts [Hrududu] - Some action poses. It looks great even without striking a pose. (1/3)

MG G Parts [Hrududu] - Some action poses. It looks great even without striking a pose. (2/3)

MG G Parts [Hrududu] - Some action poses. It looks great even without striking a pose. (3/3)

An action pose of sorts.
It looks great even without striking a pose.

This kit is the MG G Parts [Hrududu], released as a Club G (Premium Bandai) online exclusive. There was a 1/144 Hrududu released as a magazine supplement back in the day, but this is the first time we've gotten a 1/100 version. True to MG standards, it comes with a solid, chunky build along with clean color separation and gimmicks.

On either side of the G Parts [Hrududu] are thruster wing units and claw wing units. The claw wings can be deployed in two stages, and you can plug in beam saber parts borrowed from another kit. Outside of these claw wings, there aren't really any other special gimmicks — the main purpose of this kit is combining with other kits, along with the various joint parts included for that.

Since the G Parts [Hrududu] is a flying craft, a new-style black Action Base is included for aerial display. Given the nature of the G Parts [Hrududu], there's a good chance you'll end up buying multiple copies, so having an Action Base packed into every single kit feels like a bit much (wish they'd left it out and dropped the price a bit...). The two-unit combination gimmick unique to the G Parts [Hrududu] is also included — it looks pretty cool in its own right, but it kind of feels like a setup designed to make you buy two of them. (And yes, I ended up buying two for the review. -_-)

The real highlight of the G Parts [Hrududu] is ultimately not the unit itself, but Hazel Ra — the combined form with the MG Hazel Kai. Through a relatively straightforward combination process you can recreate the high-speed flight configuration of Hazel Ra, and since the center of gravity shifts heavily toward the rear, the Action Base comes in handy as a support. As expected, Hazel Ra takes up a considerable amount of display space, but it looks absolutely stunning for it. ^^ The connection between the Hazel Kai and the G Parts [Hrududu] is solid enough that there are no major issues, but it's a bit of a shame that the kit is too heavy to easily pose in the air on a stand.

Anyway, if you're looking to build Hazel Ra alongside the MG Hazel Kai, this is an essential kit — and as they say, all Aoz Lego-building adventures start with the G Parts [Hrududu]. :-)

MG G Parts [Hrududu] | 2018.7 | ¥2,200

AIThis page was translated by Claude Sonnet.