Kit Review

Straight build + Stickers

Size comparison with a cigarette pack

Figurerise Standard Shinegreymon - Various angles (1/7)

Figurerise Standard Shinegreymon - Various angles (2/7)

Figurerise Standard Shinegreymon - Various angles (3/7)

Figurerise Standard Shinegreymon - Various angles (4/7)

Figurerise Standard Shinegreymon - Various angles (5/7)

Various angles

Figurerise Standard Shinegreymon - Detail shots (1/4)

Figurerise Standard Shinegreymon - Detail shots (2/4)

Detail shots

For weapons, a large Geo Grey Sword is included.

Figurerise Standard Shinegreymon - The red parts of the blade are handled with thick PET seals, and a dimensional jewel stick

The red parts of the blade are handled with thick PET seals, and a dimensional jewel sticker is applied to the center section.

You can disassemble the Geo Grey Sword and attach the handles to use it in Dual Blade mode.

In Dual Blade mode, you can mount them on the sides of the legs using the support parts.

Figurerise Standard Shinegreymon - The stand joint parts plug in horizontally into the hole at the bottom of the hip joint, s

The stand joint parts plug in horizontally into the hole at the bottom of the hip joint,
so it locks in nice and solid.

The six wings can also be folded up like this.

Wings folded with the Dual Blades mounted

The articulation on the arms and legs is pretty average.

You can extend the range of motion by angling the hip joints diagonally downward.

Figurerise Standard Shinegreymon - Forward and backward shoulder movement. If you push it too far, the shoulder pops right of

Forward/backward shoulder articulation.
If you push it too far, the shoulder pops right off, so you need to find that sweet spot.

Wing articulation

Figurerise Standard Shinegreymon - There's a lead wire inside the tail, and since the gaps between each segment aren't all th

There's a lead wire inside the tail,
and since the gaps between each segment aren't all that generous, the range of motion isn't very large.

Figurerise Standard Shinegreymon - Poses on the ground and in the air (1/5)

Figurerise Standard Shinegreymon - Poses on the ground and in the air (2/5)

Figurerise Standard Shinegreymon - Poses on the ground and in the air (3/5)

Poses on the ground and in the air

Figurerise Standard Shinegreymon - Two-handed Geo Grey Sword pose (1/4)

Figurerise Standard Shinegreymon - Two-handed Geo Grey Sword pose (2/4)

Two-handed Geo Grey Sword pose

Dual Blade pose

Figurerise Standard Shinegreymon - Alongside the Figure-rise Standard Omegamon X-Antibody, which was already a pretty big kit

Alongside the Figure-rise Standard Omegamon X-Antibody, which was already a pretty big kit.
Shinegreymon's body is smaller, but the wings give it a much greater overall volume.

A size comparison shot with the MG First Gundam.

This kit is Shinegreymon, released as part of the Figure-rise Standard series. True to the Amplified lineup, it really stands out with its large size and intricate design. The excellent color separation combined with a generous amount of seals delivers a top-tier straight build visual.

First of all, as you can see, the large wings make it an incredibly bulky kit — it easily dwarfs a 1/100 MG in terms of sheer volume. Despite the large body, the joint strength is solid enough to keep it standing upright nice and firm. That said, the shoulders are a bit iffy, so maintaining a horizontal pose while holding the large Geo Grey Sword is a bit of a challenge joint-strength-wise.

The overall assembly feel is very smooth, giving you a really premium building experience. There were more seals than I expected — the seal work alone seemed to take over an hour. On the plus side, most of them are small accent seals, so they blend in pretty naturally, which is a relief. Either way, once you've dotted all those little seals around as accents, it definitely gives the finished look a more detailed and flashy appearance.

The signature weapon, the Geo Grey Sword, holds well in the hand with its dedicated handle, and you can split it into two pieces for Dual Blade mode as well. There are also separate joint parts that let you mount them on the sides of the legs. On top of that, the wings — which look like six blades gathered together — can be spread and folded freely, and thanks to their solid hold, they stay in whatever position you put them in.

All in all, this is a top-tier character model kit that delivers impressive size, a stunning visual, and a premium build experience. If you're a Digimon fan, don't even hesitate — just grab it. And even if you don't know Digimon, if the design speaks to you, this is definitely a kit worth recommending. :-)

Figurerise Standard Shinegreymon | 2023.6 | ¥5,000

AIThis page was translated by Claude Sonnet.