Kit Review

Straight build + Stickers

Size comparison with a cigarette pack

Figurerise Standard Maked Rider Decade (1/6)

Figurerise Standard Maked Rider Decade (2/6)

Figurerise Standard Maked Rider Decade (3/6)

Figurerise Standard Maked Rider Decade (4/6)

Figurerise Standard Maked Rider Decade (5/6)

Figurerise Standard Maked Rider Decade (6/6)

Figurerise Standard Maked Rider Decade - Detail shots (1/4)

Figurerise Standard Maked Rider Decade - Detail shots (2/4)

Detail shots

Figurerise Standard Maked Rider Decade - The black vertical panels on the face are each individually separated as individual

The black vertical panels on the face are each individually realized through separate part divisions,
with silver foil stickers applied on top and green clear eyes attached, giving it a really great sense of depth.
The only thing to watch out for is that the green clear eye pieces can pop out fairly easily, so just be careful with those.

Figurerise Standard Maked Rider Decade - The Ride Booker stored on the left side comes with both the gun form and sword form

The Ride Booker stored on the left side comes with both the gun form and sword form provided separately.

Figurerise Standard Maked Rider Decade - When you detach the Ride Booker from the side, an additional cover part is included

When you detach the Ride Booker from the side, an additional cover part is included to fill in the gap.

A total of 6 hands are included across 4 types.

Figurerise Standard Maked Rider Decade - Both the Decade Driver (left) and Neo Decade Driver (right) also come with a standby

Both the Decade Driver (left) and Neo Decade Driver (right) also come with a standby mode where they extend out to the side.

Figurerise Standard Maked Rider Decade - Combining these, you can recreate the Decade Driver in a total of 4 different config

Combining these, you can recreate the Decade Driver in a total of 4 different configurations.

Figurerise Standard Maked Rider Decade - 26 types of Rider Cards are included as small double-sided printed cellophane cards.

26 types of Rider Cards are included as small double-sided printed cellophane cards.
They're tiny, but the quality is actually pretty impressive.

The Rider Cards can be inserted into the Decade Driver as shown above.

A clear display stand is included.

Leftover parts

Limb articulation

Figurerise Standard Maked Rider Decade - Rider Card pose (1/4)

Figurerise Standard Maked Rider Decade - Rider Card pose (2/4)

Rider Card pose

Figurerise Standard Maked Rider Decade - Ride Booker pose (1/4)

Figurerise Standard Maked Rider Decade - Ride Booker pose (2/4)

Ride Booker pose

Flying kick pose

Together with previously released Heisei Kamen Rider kits.

Figurerise Standard Maked Rider Decade - No fewer than 6 types of belt parts are included so you can equip the Decade Driver

So you can equip the Decade Driver onto other Figurise Standard Kamen Rider kits,
no fewer than 6 types of belt parts are included.
Letters A through F are engraved on the inside for easy identification, and the compatible kits for each are as follows.
A: Kamen Rider Zi-O
B: Kamen Rider Ex-Aid
C: Kamen Rider Kuuga Mighty Form
D: Kamen Rider Den-O / Hibiki
E: Kamen Rider Faiz / Kabuto
F: Kamen Rider Cyclone Joker / Heat Metal

The Decade Driver applied to the Figurise Standard Kamen Rider Kuuga.

Figurerise Standard Maked Rider Decade - To apply it to Kamen Rider Build, you need to fully swap out 2 lower body parts. The

To apply it to Kamen Rider Build, you need to fully swap out 2 lower body parts.
The process is a bit of a hassle.

Figurerise Standard Maked Rider Decade - For Kamen Rider Cyclone Joker, you need to swap out the center rear belt section of

For Kamen Rider Cyclone Joker, you need to swap out the center rear belt section of the lower body before you can attach it.

This is the Figurise Standard release of Kamen Rider Decade. Kamen Rider Decade debuted in 2009 to celebrate the 10th anniversary of the Heisei Rider series. "Decade" means "10 years," and as the name suggests, he has the ability to transform into other Heisei Kamen Riders using Rider Cards.

The kit's basic composition is pretty much the same as previous releases, and the vertically divided face design is pulled off nicely thanks to some impressive part separation. The signature weapon, the Ride Booker, comes with both gun form and sword form provided separately, and the Decade Driver belt includes both the standard and Neo types, as well as both the attached and standby configurations — giving you a total of 4 possible combinations. Beyond that, the articulation and joint strength on the main body are solid and reliable, just like the previous kits.

The highlight of this kit is that 26 Rider Cards are included as small, thin plastic cards. Each card is nicely printed on both sides with the respective Kamen Rider designs, and just like in the show, the cards can be inserted into the Decade Driver. On top of that, 6 types of belt parts are included so you can collaborate the Decade Driver with other Kamen Rider kits, as if Decade has transformed into them.

Using these belt parts, you can make the Decade Driver compatible with every Figurise Standard Kamen Rider kit released so far. That said, for Kamen Rider Build you'll need to swap out the front and rear cover parts on the lower body, and for Cyclone Joker / Heat Metal you'll need to replace the center rear belt part on the lower body before you can attach the Decade Driver. It's actually quite a hassle when you try it in practice, but for the rest of the Kamen Rider kits you only need to swap the belt, so pulling off the transformation look isn't too difficult.

Anyway, the kit quality is solid and reliable, but it feels like the real appeal here lies more in the variety of transformation and crossover features than in the main figure itself. If you collect or are a fan of Kamen Rider — especially the Heisei Riders — this is probably a must-have kit. :-)

Figurerise Standard Maked Rider Decade | 2020. 12 | ¥3,200

AIThis page was translated by Claude Sonnet.