Kit Review

Straight build + Stickers

Size comparison with a cigarette pack

Figurerise Standard Masked Rider Ryuki (1/6)

Figurerise Standard Masked Rider Ryuki (2/6)

Figurerise Standard Masked Rider Ryuki (3/6)

Figurerise Standard Masked Rider Ryuki (4/6)

Figurerise Standard Masked Rider Ryuki (5/6)

Figurerise Standard Masked Rider Ryuki (6/6)

Figurerise Standard Masked Rider Ryuki - Detail shots (1/4)

Figurerise Standard Masked Rider Ryuki - Detail shots (2/4)

Detail shots

Dragredder, articulated with 10+ ball joints, is included.

Figurerise Standard Masked Rider Ryuki - Laid out straight, it measures a whopping 63cm. (1/3)

Laid out straight, it measures a whopping 63cm.

Dragredder mouth and leg articulation

Using the articulation at each segment, you can pull off all kinds of poses.

Figurerise Standard Masked Rider Ryuki - The accessories include the Strike Vent, Drag Visor, and Sword Vent. The Sword Vent

The accessories include the Strike Vent, Drag Visor, and Sword Vent.
The Sword Vent needs to be detached from Dragredder's tail.

Figurerise Standard Masked Rider Ryuki - The Strike Vent looks just like Dragredder's head, but it's included separately in a

The Strike Vent looks just like Dragredder's head, but
it's included separately in a smaller size meant to be held in the hand.

5 Advent Cards made of thin PET material are included.

The Advent Cards can be slotted into the back of the Drag Visor.

Dragredder's legs can be attached to the sides of the shoulders as the Guard Vent.

The Guard Vent can also be held in the hand by adding a separate handle.

Figurerise Standard Masked Rider Ryuki - A total of 7 hands are included, and the one on the far right is a dedicated hand fo

A total of 7 hands are included, and the one on the far right is a dedicated hand for holding the Advent Card.

A clear general-purpose stand and 2 support stands are included.

Figurerise Standard Masked Rider Ryuki - The 2 support stands can be fixed inside Dragredder's segments, and by positioning b

The 2 support stands can be fixed inside Dragredder's segments,
and by positioning both of them well as shown, you can achieve a wide variety of poses.

Dragredder poses using the support stands

Leftover parts

Limb articulation.
The ankles are quite flexible.

Forward/backward shoulder articulation

Advent pose

Vent Sword pose

Strike Vent pose

Figurerise Standard Masked Rider Ryuki - Vent Guard pose (1/4)

Figurerise Standard Masked Rider Ryuki - Vent Guard pose (2/4)

Vent Guard pose

Final Vent, ready!

Figurerise Standard Masked Rider Ryuki - Final Vent pose with Dragredder (1/4)

Figurerise Standard Masked Rider Ryuki - Final Vent pose with Dragredder (2/4)

Final Vent pose with Dragredder

Together with Figure-rise Standard Masked Rider Decade.

You can do a crossover by applying Masked Rider Decade's belt D-number.

This is Masked Rider Ryuki released as part of the Figure-rise Standard series. The main body is built the same way as previous kits, but one notable feature is that the silver parts have an Extra Finish coating applied. Above all, the big highlight is that Dragredder — the massive dragon unique to the Ryuki series — is included with the kit.

The Ryuki main body stays true to the Figure-rise concept, coming out as a high-quality action figure model kit with excellent articulation and solid joint strength that makes posing a breeze. The hip and ankle range of motion are both great, giving you a really stable base for floor poses. The joints in particular have this sweet spot where they're smooth yet lock firmly in place — honestly some of the most satisfying joints across the entire Figure-rise series.

Dragredder can be freely positioned thanks to its 10+ ball joints, and the ball joints hold incredibly firmly, staying put no matter what angle you set them at. On top of that, you can use the 2 included support stands to set up all kinds of poses including the Final Vent, and when fully stretched out straight it's a massive 63cm accessory parts piece.

The weapons include the Strike Vent, Drag Visor, Sword Vent, and Guard Vent. With the exception of the Drag Visor, the weapons are all based on the concept of borrowing parts from Dragredder. The Strike Vent, which corresponds to Dragredder's head, is provided separately in a slightly smaller size. Also included are 5 PET material Advent Cards, so you can recreate the scene of sliding one into the Drag Visor on the left forearm.

As a kit that faithfully recreates the accessories and lore unique to Masked Rider Ryuki, the build quality is excellent from the main body all the way to Dragredder, making it a very satisfying action figure model kit overall. If you have fond memories of Masked Rider Dragon (as it was known in Korea), this is an exemplary Figure-rise Standard kit I'd highly recommend. :-)

Figurerise Standard Masked Rider Ryuki | 2021.4 | ¥4,300

AIThis page was translated by Claude Sonnet.