Macross Delta 1/72

Sv-262Ba Draken III [Bogue]

Kit Review

Straight build + Panel lining + Seals

1. Battroid mode

1/72 Sv-262Ba Draken III [Bogue] - Size comparison with a cigarette pack

Size comparison with a cigarette pack

1/72 Sv-262Ba Draken III [Bogue] (1/7) 1/72 Sv-262Ba Draken III [Bogue] (2/7) 1/72 Sv-262Ba Draken III [Bogue] (3/7) 1/72 Sv-262Ba Draken III [Bogue] (4/7) 1/72 Sv-262Ba Draken III [Bogue] (5/7) 1/72 Sv-262Ba Draken III [Bogue] (6/7) 1/72 Sv-262Ba Draken III [Bogue] (7/7)

1/72 Sv-262Ba Draken III [Bogue] - Detail shots (1/4) 1/72 Sv-262Ba Draken III [Bogue] - Detail shots (2/4) 1/72 Sv-262Ba Draken III [Bogue] - Detail shots (3/4) 1/72 Sv-262Ba Draken III [Bogue] - Detail shots (4/4)

Detail shots

1/72 Sv-262Ba Draken III [Bogue] - There are a few leftover parts.

There are a few leftover parts.

1/72 Sv-262Ba Draken III [Bogue] - The articulation is the same as the existing Draken III.

The articulation is the same as the existing Draken III.

1/72 Sv-262Ba Draken III [Bogue] - Aerial firing pose (1/2) 1/72 Sv-262Ba Draken III [Bogue] - Aerial firing pose (2/2)

Aerial firing pose

1/72 Sv-262Ba Draken III [Bogue] - Right arm mini gun pod firing pose (1/2) 1/72 Sv-262Ba Draken III [Bogue] - Right arm mini gun pod firing pose (2/2)

Right arm mini gun pod firing pose

1/72 Sv-262Ba Draken III [Bogue] - There's a bonus large sword for the Draken III Kiseki included.

There's a bonus large sword for the Draken III Kiseki included.

1/72 Sv-262Ba Draken III [Bogue] - The large sword applied to the Draken III Kiseki. (1/2) 1/72 Sv-262Ba Draken III [Bogue] - The large sword applied to the Draken III Kiseki. (2/2)

The large sword applied to the Draken III Kiseki.

1/72 Sv-262Ba Draken III [Bogue] - The basic transformation process is almost identical to the Kiseki, but the head 1/72 Sv-262Ba Draken III [Bogue] - The basic transformation process is almost identical to the Kiseki, but the head 1/72 Sv-262Ba Draken III [Bogue] - The basic transformation process is almost identical to the Kiseki, but the head 1/72 Sv-262Ba Draken III [Bogue] - The basic transformation process is almost identical to the Kiseki, but the head

The basic transformation process is almost identical to the Kiseki,
but the head transformation method has changed slightly.
As shown in the photos above, you pull the head upward, rotate it 180 degrees, close both side fins, then plug it back down.

2. Gerwalk mode

1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (1/6) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (2/6) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (3/6) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (4/6) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (5/6) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into GERWALK mode (6/6)

Transformed into GERWALK mode

3. Gerwalk mode (folding arm type)

1/72 Sv-262Ba Draken III [Bogue] - GERWALK mode with arms stowed in folding arm configuration (1/2) 1/72 Sv-262Ba Draken III [Bogue] - GERWALK mode with arms stowed in folding arm configuration (2/2)

GERWALK mode with arms stowed in folding arm configuration

4. Fighter mode

1/72 Sv-262Ba Draken III [Bogue] - Transformed into Fighter mode (1/2) 1/72 Sv-262Ba Draken III [Bogue] - Transformed into Fighter mode (2/2)

Transformed into Fighter mode

1/72 Sv-262Ba Draken III [Bogue] - Underside with landing gear attached

Underside with landing gear attached

1/72 Sv-262Ba Draken III [Bogue] - The canopy can be swapped out for a clear version. (1/2) 1/72 Sv-262Ba Draken III [Bogue] - The canopy can be swapped out for a clear version. (2/2)

The canopy can be swapped out for a clear version.

1/72 Sv-262Ba Draken III [Bogue] - Fighter mode viewed from various angles on a stand. (1/4) 1/72 Sv-262Ba Draken III [Bogue] - Fighter mode viewed from various angles on a stand. (2/4) 1/72 Sv-262Ba Draken III [Bogue] - Fighter mode viewed from various angles on a stand. (3/4) 1/72 Sv-262Ba Draken III [Bogue] - Fighter mode viewed from various angles on a stand. (4/4)

Fighter mode viewed from various angles on a stand.

1/72 Sv-262Ba Draken III [Bogue] - Comparison with the Draken III Kiseki in each mode. (1/3) 1/72 Sv-262Ba Draken III [Bogue] - Comparison with the Draken III Kiseki in each mode. (2/3) 1/72 Sv-262Ba Draken III [Bogue] - Comparison with the Draken III Kiseki in each mode. (3/3)

Comparison with the Draken III Kiseki in each mode.

1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (1/6) 1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (2/6) 1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (3/6) 1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (4/6) 1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (5/6) 1/72 Sv-262Ba Draken III [Bogue] - Straight build shots of all 3 modes (6/6)

Straight build shots of all 3 modes

Following the Macross Delta 1/72 Draken III Kiseki, the Bogue version has now been released. The basic body structure is the same as the Kiseki, but the head design is completely different, and the body color has also changed from deep blue to deep green.

First off, just like the existing 1/72 Draken III, the joints are sturdier than the Siegfried and the post-transformation lock is impressive. The transformation process is tricky and complex, but the gimmick itself is still a slick transforming kit. The head design change also brought a change to the head transformation method, but the body transformation remains the same as before — so if you're curious about the Draken III's complex transformation process, please refer to the 1/72 Draken III Kiseki reviewfor reference.

As a small bonus, the large sword for the Kiseki is included, and the series tradition of providing both seals and wet decals is carried over here as well. Either way, all the other basic features are largely the same as the Kiseki — it's a typical Macross-style color variant kit through and through.

It's an excellent transforming kit with an impressive level of transformation quality and solid joints — if you were a fan of the Bogue unit in the show, this should be a fun build. :-)

1/72 Sv-262Ba Draken III [Bogue] | 2017.3 | ¥5,200

AIThis page was translated by Claude Sonnet.