Kit Review

Straight build

Size comparison with a cigarette pack

Megami Device Bullet Knight Executioner - Armed Mode (1/6)

Megami Device Bullet Knight Executioner - Armed Mode (2/6)

Megami Device Bullet Knight Executioner - Armed Mode (3/6)

Megami Device Bullet Knight Executioner - Armed Mode (4/6)

Armed Mode

Megami Device Bullet Knight Executioner - Detail shots (1/4)

Megami Device Bullet Knight Executioner - Detail shots (2/4)

Detail shots

Base Body Mode parts

Megami Device Bullet Knight Executioner - Removing the Armed Mode parts and switching to Base Body Mode (1/3)

Removing the Armed Mode parts and switching to Base Body Mode

The face can be swapped between three expressions.

Megami Device Bullet Knight Executioner - In both Base Body and Armed Mode, you can swap out the bangs parts into various dif

In both Base Body and Armed Mode, you can swap out the bangs parts into various different styles.

Weapon parts that can be combined in all sorts of ways

Two representative configurations: the Skull Masker (left) and the Taisha (right).

A total of 7 different hand parts are included.

A clear red simple stand is included in the box.

Megami Device Bullet Knight Executioner - Joint parts for attaching additional parts to the arms and legs, plus accessories l

Joint parts for attaching additional parts to the arms and legs, plus accessories like a cross, are included.

You can choose between two different forearm armor designs for Armed Mode.

Megami Device Bullet Knight Executioner - You can detach the skull head from the Skull Masker and mount it on the shoulder us

You can detach the skull head from the Skull Masker and mount it on the shoulder using the joint parts.

Using the joint parts, you can mount the cape so it hangs like a rear skirt.

The joint parts can be used in a variety of ways as shown above.

Leftover parts

Excellent limb articulation

Megami Device Bullet Knight Executioner - The waist articulates quite flexibly in all directions, but it does pop off fairly

The waist articulates quite flexibly in all directions, but it does pop off fairly easily.

Megami Device Bullet Knight Executioner - Like some previous kits, you can swap in a flared front skirt to expand the hip joi

Like some previous kits, you can swap in a flared front skirt to expand the hip joint's range of motion.

Megami Device Bullet Knight Executioner - If you pull the hip joint out slightly to the side, you can bend the thigh inward,

If you pull the hip joint out slightly to the side, you can bend the thigh inward,
which lets you pull off a proper crossed-legs pose.

Megami Device Bullet Knight Executioner - Base Body Mode poses (1/5)

Megami Device Bullet Knight Executioner - Base Body Mode poses (2/5)

Megami Device Bullet Knight Executioner - Base Body Mode poses (3/5)

Base Body Mode poses

Megami Device Bullet Knight Executioner - Armed Mode action (1/3)

Armed Mode action

Megami Device Bullet Knight Executioner - Poses with the cape draped over just one shoulder (1/6)

Megami Device Bullet Knight Executioner - Poses with the cape draped over just one shoulder (2/6)

Megami Device Bullet Knight Executioner - Poses with the cape draped over just one shoulder (3/6)

Megami Device Bullet Knight Executioner - Poses with the cape draped over just one shoulder (4/6)

Poses with the cape draped over just one shoulder

Megami Device Bullet Knight Executioner - All kinds of poses are possible with various other part combinations. (1/6)

Megami Device Bullet Knight Executioner - All kinds of poses are possible with various other part combinations. (2/6)

Megami Device Bullet Knight Executioner - All kinds of poses are possible with various other part combinations. (3/6)

Megami Device Bullet Knight Executioner - All kinds of poses are possible with various other part combinations. (4/6)

All kinds of poses are possible with various other part combinations.

Together with the Megami Device Asura Gumi.

The Bullet Knight Executioner has been released as Megami Device kit No. 13. "Executioner" literally means someone who carries out an execution, and the visual design gives off the vibe of a grim reaper wielding a scythe. It comes with large horns on the head, a big cape on each shoulder, and carries a large weapon called the Skull Masker. (In Korean pronunciation it can also be rendered as "Eksikyusyeoneo," but since the official product name distributed by the domestic importer is "Executioner," that's the spelling used here.)

The base body format is similar to previous kits, but the overall joint articulation is the most advanced we've seen yet. The waist bends very flexibly in all directions, and you can pull the hip joint slightly outward and bend it inward to cross the thighs in an X shape. This makes crossed-legs poses and dynamic waist twists possible. That said, because the waist's range of motion is so large, the internal ball joint tends to pop out fairly often, so you'll want to handle it with care.

Like other girlplas, it supports swapping between Base Body Mode and Armed Mode, with two different heads for each mode. Three facial expressions are included for both, and the bangs parts can also be applied in two to three different styles. The weapons can be assembled by combining individual parts for various purposes — beyond the Skull Masker and the basic weapon called the "Taisha," you can mix and match into all sorts of configurations. On top of that, there's a gimmick to use the joint parts to make the cape hang like a rear skirt, the ability to mount the skull head on the shoulder, and plenty of other part combination options. Add in the ability to remove the cape entirely or wear it on just one side, and you've got a practically endless number of ways to configure the look.

This kit's selling points are its top-tier articulation and the customization that comes from all the different part combinations, and the overall build quality is excellent. There are a few snap-fit connections that feel a little shaky, but they're the kind you can just glue without any trouble, and aside from the waist popping off under extreme movement, the joint strength is solid and poses hold well. If you like the look of it, this is definitely a girlpla worth recommending. :-)

Megami Device Bullet Knight Executioner | 2021.1 | ¥6,200

AIThis page was translated by Claude Sonnet.