Kit Review

Straight build + Stickers

Full parts layout

HG The Witch from Mercury Expansion Parts Set 1 - A weapon display base for The Witch from Mercury is also included as a

Weapon Display Base for The Witch from Mercury One set is also included.

1. Expanstion Parts for HG Darilbalde

Expansion parts for the HG Daril Balde

Front and back of the new binder "Daya Ambika"

HG The Witch from Mercury Expansion Parts Set 1 - The 4 bit weapons "Gusa Ishvara" mounted on the backpack can

The 4 bit weapons "Gusa Ishvara" mounted on the backpack can be detached and fitted with beam parts.

The handle on the side of the beam shot rifle is articulated.

HG The Witch from Mercury Expansion Parts Set 1 - The gun blade comes in two versions you can swap between — an deployed

The gun blade comes in two versions you can swap between — an deployed form with a blade, and a stowed form.

HG The Witch from Mercury Expansion Parts Set 1 - The stowed gun blade can be mounted under the beam shot rifle to use it

The stowed gun blade can be mounted under the beam shot rifle to use it as the Composite Arms.

HG The Witch from Mercury Expansion Parts Set 1 - Mounted on the HG Daril Balde (1/3)

Mounted on the HG Daril Balde

HG The Witch from Mercury Expansion Parts Set 1 - To attach the expansion parts, you'll need to remove the existing binde

To attach the expansion parts, you'll need to remove the existing binders and backpack first.

HG The Witch from Mercury Expansion Parts Set 1 - The Gusa Ishvara can also be mounted on the forearm together with the b

The Gusa Ishvara can also be mounted on the forearm together with the beam parts.

Composite Arms + Gusa Ishvara beam saber pose

HG The Witch from Mercury Expansion Parts Set 1 - Gun blade pose (1/3)

Gun blade pose

HG The Witch from Mercury Expansion Parts Set 1 - Gusa Ishvara launch pose with beam parts attached. (1/3)

Gusa Ishvara launch pose with beam parts attached.

2. Expanstion Parts for HG Michaelis

Expansion parts for the HG Michaelis

HG The Witch from Mercury Expansion Parts Set 1 - Using the articulated handle and fixing ring of the new weapon "Ja

Using the articulated handle and fixing ring of the new weapon "Jabelin Bracer,"
it can be securely attached to the forearm.

HG The Witch from Mercury Expansion Parts Set 1 - Detach the Strike Brace mounted on the Jabelin Bracer, then slide both

Detach the Strike Brace mounted on the Jabelin Bracer,
then slide both armor panels open to slightly expose the beam machine gun.
You can then plug in the beam parts and launch them using the wire.

Two wires are included..

They're used when launching the Drill Bracer and Strike Brace.

HG Michaelis with the Jabelin Bracer attached

HG The Witch from Mercury Expansion Parts Set 1 - To attach the Jabelin Bracer, the small shield on the left arm needs to

To attach the Jabelin Bracer, the small shield on the left arm needs to be removed first.

HG The Witch from Mercury Expansion Parts Set 1 - Jabelin Bracer action pose (1/3)

Jabelin Bracer action pose

Drill Jabelin launch pose

HG The Witch from Mercury Expansion Parts Set 1 - Strike Brace launch pose (1/3)

Strike Brace launch pose

3. Expanstion Parts for HG Gundam Pharact

Expansion parts for the HG Gundam Pharact

Two Beam Calibers are added as new weapons.

HG The Witch from Mercury Expansion Parts Set 1 - You can deploy/slide the gimmicks on both Beam Calibers and combine the

You can deploy/slide the gimmicks on both Beam Calibers and combine them into a "Beam Musket."

HG The Witch from Mercury Expansion Parts Set 1 - You'll need to swap out the hip joint parts on the existing HG Gundam P

You'll need to swap out the hip joint parts on the existing HG Gundam Pharact.

HG The Witch from Mercury Expansion Parts Set 1 - This is so you can plug the two Beam Caliber joint parts into the holes

This is so you can plug the two Beam Caliber joint parts into the holes on the new hip joint parts.

HG Gundam Pharact with expansion parts applied

The Beam Calibers mounted in the holes of the replaced hip joint parts.

HG The Witch from Mercury Expansion Parts Set 1 - Beam Caliber pose (1/3)

Beam Caliber pose

Beam Musket pose

HG The Witch from Mercury Expansion Parts Set 1 - Together with the HG Daril Balde / Michaelis / Gundam Pharact with expa

Together with the HG Daril Balde / Michaelis / Gundam Pharact with expansion parts applied.

4. Expanstion Parts for HG Guel's Dilanza

HG The Witch from Mercury Expansion Parts Set 1 - Lastly, two beam parts for the HG Dilanza (Guel's custom) are also incl

Lastly, two beam parts for the HG Dilanza (Guel's custom) are also included.

HG The Witch from Mercury Expansion Parts Set 1 - The beam parts in the original kit were green (left), while this kit pr

The beam parts in the original kit were green (left), while this kit provides them in pink.

HG The Witch from Mercury Expansion Parts Set 1 - Pink beam partisan pose (1/3)

Pink beam partisan pose

Pink beam torch pose

This kit is the HG The Witch from Mercury MS Expansion Parts Set 1, released as a Club G (Premium Bandai) online exclusive. It includes expansion parts compatible with four standard release kits — HG Daril Balde, HG Michaelis, HG Gundam Pharact, HG Dilanza (Guel's custom)— and as a bonus, a ¥500 Weapon Display Base for The Witch from Mercury is also included as one set.

First up, for the HG Daril Balde, you get new binders "Daya Ambika" that attach to both shoulders, plus a backpack fitted with four bit weapons "Gusa Ishvara." A new weapon is also added in the form of the Composite Arms, which combines the beam shot rifle and gun blade. You can also detach the gun blade mounted under the beam shot rifle and swap in a blade with beam parts. The Gusa Ishvara units detached from the backpack can have beam parts plugged in and be displayed in a launched state using the included display base.

For the HG Michaelis, you get the "Jabelin Bracer" weapon that attaches to the left arm. Using the included wires, you can also recreate the launched state of the Drill Jabelin and Strike Brace.

For the HG Gundam Pharact, two Beam Calibers are included, and they can be combined into a Beam Musket. After swapping in the new hip joint parts with holes, you can use the joint parts to mount a Beam Caliber on each side.

Finally, for the HG Dilanza (Guel's custom), two pink beam parts are included. These can be used with the beam torch and beam partisan in place of the green beam parts that came with the original kit.

So this is an accessory parts kit that's handy for four different HG kits. Overall the quality is solid HG-level stuff, and it blends in nicely with the existing kits without looking out of place. Either way, if you're collecting The Witch from Mercury kits, this seems like a pretty useful accessory kit. :-)

HG The Witch from Mercury Expansion Parts Set 1 | 2024.1 | ¥2,000

AIThis page was translated by Claude Sonnet.