Kit Review

Straight build

Size comparison with a cigarette pack

Arca Nadea Xeno Alma Flame Straile - Monster Mode from various angles (1/6)

Arca Nadea Xeno Alma Flame Straile - Monster Mode from various angles (2/6)

Arca Nadea Xeno Alma Flame Straile - Monster Mode from various angles (3/6)

Arca Nadea Xeno Alma Flame Straile - Monster Mode from various angles (4/6)

Monster Mode from various angles

Underside

Arca Nadea Xeno Alma Flame Straile - Detail shots (1/3)

Detail shots

Included stand

Auxiliary parts for combining or weapon mode configuration

Arca Nadea Xeno Alma Flame Straile - The legs move in 3 segments. They bend forward pretty well, but the mane in the back lim

The legs move in 3 segments.
They bend forward pretty well, but the mane in the back limits how far they can bend backward.

The legs can be raised quite a bit to the sides.

Body articulation

Mouth articulation

Arca Nadea Xeno Alma Flame Straile - Action pose 1 (1/3)

Action pose 1

Action pose 2

To combine with Lumitea for Weapon Mode, disassemble as shown above.

Combine the legs and part of the body to form a single band, as shown on the right.

Then assemble as shown above to form the backpack.

Arca Nadea Xeno Alma Flame Straile - Remove Lumitea's wings and shoulder decorations, and add a separate joint part to the ba

Remove Lumitea's wings and shoulder decorations, and add a separate joint part to the back.

Now combine with the reassembled Flame Straile.

Weapon Mode combined with Lumitea

Arca Nadea Xeno Alma Flame Straile - Detach the leg pillar section from the backpack again, and add parts to both ends to use

Detach the leg pillar section from the backpack again,
and add parts to both ends to use as a weapon.

Arca Nadea Xeno Alma Flame Straile - Lumitea Weapon Mode poses (1/6)

Arca Nadea Xeno Alma Flame Straile - Lumitea Weapon Mode poses (2/6)

Arca Nadea Xeno Alma Flame Straile - Lumitea Weapon Mode poses (3/6)

Arca Nadea Xeno Alma Flame Straile - Lumitea Weapon Mode poses (4/6)

Lumitea Weapon Mode poses

This kit is the Xeno Alma Flame Straile, released as part of Kotobukiya's Arcanadea series. Like the previously released Hydro Zephos & Trickle Decapodiait follows the same concept. It works as a standalone character, but can also be disassembled and combined as armaments for Arcanadea Lumitea.

The design is a two-legged ostrich-like character, and true to its "Flame" name, it features a red color scheme with a flame-inspired design. Due to its structure being just a torso and legs, dynamic posing options are pretty limited. That said, the joint strength is solid all around with no loose spots, so you don't have to worry about it holding poses. For reference, the standalone form is called Monster Mode, while the combined armament form is called Weapon Mode.

True to the Xeno Alma series, it can be disassembled and reassembled to attach to Lumitea as a backpack and shoulder decorations. It connects to Lumitea without any major issues, and there's also a gimmick where the leg sections attached as the backpack can be detached and used as a weapon. It can also combine with the simultaneously released Xeno Alma Blaze Ophiss. (See the Blaze Ophiss review for details on that combination.)

All in all, this is a solid little Gunpla accessory kit, and if you already have Lumitea, it seems like a fun and easy addition to enjoy. :-)

Arca Nadea Xeno Alma Flame Straile | 2025.12 | ¥3,500

AIThis page was translated by Claude Sonnet.