Kit Review
Straight build
Size comparison with a cigarette pack
Detail shots
Weapons separated to recreate Gaofar (Type A)
You can also swap out the Type A parts to recreate Gaofar (Type B).
Without the skirt, leg articulation improves quite a bit.
Parts added exclusively for Gaofar
Gaofighgar-exclusive parts not used in Gaofar mode
You can combine the separated weapons to recreate 4 separate mecha.
Phantom Gao
Underside
Liner Gao II
Stealth Gao III
Underside
Drill Gao II
Underside
To recreate Gaofar, first separate the above parts from Phantom Gao.
When recreating Gaofighgar, the skirt parts at the bottom of Phantom Gao are additionally separated and used.
Gaofighgar's shoulders are taken from the nose section of Liner Gao II.
To attach Stealth Gao III, you first need to separate the above parts.
After pulling out the internal locking pin, swap the wingtip parts for clear parts, then attach.
Drill Gao II transformation for Gaofighgar
The remaining mecha blocks after removing all Gaofighgar-specific parts
Two separate joint parts are included to recreate the high-speed flight mode.
First, split Drill Gao II apart on both sides, then pull out the locking pins from the bottom of the feet.
After adding the two joint parts to Stealth Gao III..
Once Liner Gao II joins in and combines with Gaofar, the transformation is complete.
High-speed flight mode
Underside
You can also remove the Gaofar armor to recreate the maid-style body mode.
Parts used exclusively in body mode
Just like Gaofar (Type B), you can swap out some of the body mode's exterior parts to recreate body mode (light armor).
The hip joint articulation differs quite a bit between regular body mode and body mode (light armor), due to the presence or absence of the skirt.
Gaofar-exclusive parts left over when switching to body mode
There's an unusual part included that looks like a flute.
It's a helper part that comes in handy when separating the abdominal parts.
In body mode, you can choose from two different apron styles.
Rotating the locking pin at the bottom rear of Phantom Gao 90 degrees lets you attach it to body mode.
Phantom Gao attached in place of the body mode's ribbon
The face can be swapped out for 3 different expressions.
The front of the Dividing Driver can be swapped to a Type B version, and the tip can also be spread open.
A total of 11 humanoid hand parts are included.
Mecha hand parts
You can choose from 2 different back-of-hand parts for the mecha hands.
A tray effect part and 2 drinks are included as accessories.
You can also split the effect part into two to use as Broken Phantom and Protect Wall effect parts.
The Protect Wall part can be securely attached to the hole in the open palm hand.
Powered Suit parts are also included.
You can borrow Gaofighgar's shoulders and forearms and attach them to the Powered Suit.
With the Powered Suit equipped
Attaching the left forearm to Stealth Gao III and borrowing the wrist parts from the Cross Frame Girl Goldymarg & Stealth Gao II set
lets you have her hold Goldymarg too.
Though due to the weight, a support stand is pretty much essential.
Joint parts for the stand
Leftover parts
Limb articulation is similar to previous kits, and the caterpillar treads on the back of the legs can be deployed, though they don't reach the ground.
Body mode serving pose.
Insert the tray's locking pin into the hole in the open palm hand for a secure hold.
Body mode pose with the open-front apron
Body mode pose with Phantom Gao attached
Body mode (light armor) pose
Gaofar (Type A) pose
Gaofar (Type B) pose with Drill Gao II attached
Gaofighgar pose
Hell and Heaven pose
Protect Wall pose
Broken Phantom pose
Two types of Dividing Driver poses
Powered Suit equipped pose
Together with Cross Frame Girl GaoGaiGar.
Quality has improved across the board — size, detail, joint strength, you name it.